Commercial Fill & Clean

PROTECTOR PROFILL®

ProFill is a range of simple, easy to use top up units for demineralised water for heating and cooling systems. The units are installed in line with the pressurisation unit and filter harmful limes, salts and other minerals. When used with our mixed ion exchange resin the anion and cation exhange controls the pH and conductivity of the incoming raw fill water.

The units are sized to the water hardness and annual fill rate and have an operating temperature to 95% and maximum pressure of 10 Bar. The units are available in 4, 12.5, 25 and 50 litres which is the volume of resin in each unit.

PROFILL® Mobile

Our ProFill mobile is used for demineralised filling of heating and cooling systems and for resin rinsing when remedial cleaning of systems previously treated with chemicals is required. When used with our controlled pH resin the fill water achieves VDI2035 water quality standards.

It is based on the same technology as our ProFill 50 and offers simple monitoring with a flow rate of 25l/m.

PUROTAP® Expert

Our Mobile Reverse Osmosis unit for hyper-filtration filling of industrial systems.

Hyper filtration operating at pressures of up to 18 bar through a filter diaphragm with a gauge width of less than one nanometre. This equates to one millionth of a millimetre and is designed to remove bacteria from your fill water.

Nexion resin

Our 2‑component mixed bed resin has a high proportion of anion resin for reliable full desalination and controlled pH value. Removes limescale and corrosive salts from water.

To guarantee that PUROTAP appliances work faultlessly and for a long time, it is recommended to use only PUROTAP mixed bed resin.

High power resin

Tested 2‑component mixed bed resin with high proportion of anion resin for reliable full desalination and controlled pH value. Removes limescale and corrosive salts from water.

To guarantee that PUROTAP appliances work faultlessly and for a long time, it is recommended to use only PUROTAP mixed bed resin.